Fiery EX2101 Job Management Manual page 81

For xerox 2101
Hide thumbs Also See for Fiery EX2101:
Table of Contents

Advertisement

3
3-21 Defining Mixed Media settings*
3. Choose the desired duplexing option for the specified page range from the
Duplex menu.
4. Choose the desired color of media for the specified page range from the Media
Color menu.
5. Choose the desired media for the specified page range from the Media Type menu.
6. Choose the source tray containing the specified media type from the Paper
Source menu.
7. Click Add to add the media specification to the Selection List. To remove a mixed
media specification, select it and click Remove.
Define and add more mixed media specifications as necessary. Page ranges not specified
as mixed media print on the media defined by the Paper Source settings.
8. In the Chapter Start field, enter page numbers on which to start new chapter sections.
Enter page numbers as comma-separated values (for example: 4,9,17) to designate the
start of each new chapter. This feature forces each starting page to use a right-side page,
adding a preceding left-sided blank, if necessary.
It is not necessary to enter the first page, and page numbers refer to the
N
:
OTE
numbering of the original document. If you use the Chapter Start feature, all media
specified in the Media Type menu per chapter must share the same dimensions (for
example: all Letter, all Tabloid, or all A4).
9. To apply finishing options to each chapter section created using the Chapter Start
feature (for example, stapling or sorting), select "Define Each Chapter As A Separate
Finishing Set."
10. Click OK.
The Job Properties dialog box appears.
11. Click OK to close the Job Properties dialog box and apply the Mixed Media settings to
the job.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex2101

Table of Contents