Xerox DocuColor 12 Supplement Manual page 13

5
Perform one of the following:
•
Place the first original on the Document
Glass.
•
Load the first batch of originals into the DADF.
6
Select any additional features desired for the copy
job.
NOTE: All feature settings are maintained for the
entire copy job. You can not change any feature
settings once the Start button is selected.
7
Press the Start button.
8
When the original(s) have been scanned, a screen
displays the current copy settings and the End
Job button.
9
Remove the original(s) from the Document Glass
of the DADF output tray.
10 Perform one of the following:
•
If you scanned your first original from the
Document Glass, place the next original on
the Document Glass.
•
If you used the DADF to scan your first set of
originals, place your next set of originals in the
DADF.
11 Press the Start button to continue the copy job.
12
For all additional originals, repeat steps 9 and 10.
13
When all pages or all sets have been scanned,
touch End Job on the Job in Progress screen.
14 Copies will be delivered to the appropriate output
tray.
DOCUCOLOR 12/DCCS 50
Figure 7: Job in Progress screen
9 CUSTOMER EPC SUPPLEMENT
1
2
3
5
6
7