Tools - Xerox DocuColor 12 Supplement Manual

Tools

In Tools, the System Administrator can set the
default value for the Copy Output feature.
1 Press the Administration button above the
numeric keypad to display the Access screen.
2
Touch the Tools button to display the Tools
Access Number screen.
3
Use the numeric keypad to enter the correct
password and touch Enter on the Touch Screen.
After you have entered the correct password, the
Tools screen is displayed.
4
On the Tools screen, touch the Feature Defaults
icon to display the Feature Defaults screen.
5
Use the up and down arrows to highlight the Copy
Output feature. Touch the Change Settings
button.
6
Select one of the following for Copy Output
default:
•
Auto Output
•
Collated
•
Uncollated
7
Touch Save. This saves your selection and
returns you to the Feature Defaults screen.
8
Touch Close to display the Tools screen.
9
Touch Close to exit Tools Mode.
NOTE: For more information on Tools mode, refer
to the DocuColor 12 System Administration Guide
or the Document Centre ColorSeries 50 System
Administration Guide.
DOCUCOLOR 12/DCCS 50
Figure 10: Administration button
11 CUSTOMER EPC SUPPLEMENT
1
2
3
5
6
7