Fluke DSP-100 User Manual page 83

If the test tool does not detect a remote, the following message appears:
restart the analyzer and scan for the remote again, press
Single Test screen, press
TDX Analyzer Results
When the TDX analyzer test is complete, the TDX analyzer results screen
appears. Table 4-2 describes the items on the analyzer screen.
Table 4-2. Items on the TDX Analyzer Results Screen
Item
. To run the TDX analyzer, press
.
The cable pairs relevant to the results.
The highest magnitude of crosstalk measured on the cable pair. A peak over
50 indicates a crosstalk level that exceeds the limit specified by the selected
test standard. Crosstalk levels are adjusted to compensate for cable
attenuation.
The measured distance from the main unit to the peak crosstalk value.
Press to see a plot that shows where crosstalk is detected on the cable.
Running Individual Tests
. To return to the first
Description
4
The TDX Analyzer
. To
4-7