Fluke DSP-100 User Manual page 12

DSP-100/2000
Users Manual
Produces 2-way Autotest results in approximately 20 seconds.
Includes a stored library of common test standards and cable types.
Allows for configuration of up to 4 custom test standards.
Time Domain Crosstalk (TDX ) analyzer locates the position of crosstalk
(NEXT) problems on a cable.
Tests for return loss (RL).
Produces plots of NEXT, attenuation, ACR, and RL. Shows NEXT, ACR, and
attenuation results up to 155 MHz.
Stores at least 500 cable test results in nonvolatile memory.
Monitors impulse noise and network traffic on Ethernet systems. Hub port
locator helps you identify port connections.
Sends stored test reports to a host computer or directly to a serial printer.
Flash EPROM accepts test standard and software upgrades.
Tests fiber optic cable when used with a Fluke DSP Fiber Optic Meter.
Model DSP-2000 includes the following additional features:
Monitors 100BaseTX network traffic.
Diagnostic routine provides specific information about the location and cause
of an Autotest failure.
Tests for remote return loss (RL@REMOTE) and power sum NEXT
(PSNEXT).
Determines which standards are supported by a hub port connection.
Tone generator lets you use an inductive pickup device to identify cables in a
LAN installation.
1-2