Fluke DSP-100 User Manual page 29

Item Feature
Rotary Switch
F
Display
WAKE UP
RS-232C serial
port
AC adapter/
charger jack
AC power
indicator
RJ45
connector(s)
BNC connector
Table 2-4. Main Unit Features
Selects the test tool's modes.
Exits the current screen.
Model DSP-2000 only. Automatically provides more specific information on
the cause of an Autotest failure.
Starts the highlighted test or restarts the test last run.
Provide functions related to the concurrent display. Softkey functions are
shown in the display area above the keys.
A LCD display with backlight and adjustable contrast.
Allow left, right, up, and down movement on the display. Increase or
decrease the numerical values of user-definable parameters.
Saves Autotest results and parameter changes in memory.
Selects the highlighted item from a menu.
Controls the display backlight. Pressing for 1 second allows adjustment of
the display contrast. Reactivates the test tool when the tool is in power
down mode.
A 9-pin connector for interfacing with a printer or host computer via a
standard IBM-AT EIA RS-232C serial cable.
Connection for the ac adapter/charger supplied with the test tool.
LED Style 1: A green LED that turns on when the test tool is powered with
the ac adapter/charger.
LED Style 2: A multicolor LED with four states:
Off: AC adapter/charger is not connected, or is connected without the
battery pack installed.
Blinking Red: The ac adapter/charger is trickle charging the battery in
preparation for fast charging. This mode indicates an extremely low
battery voltage. The test tool may not operate.
Steady Red: The ac adapter/charger is fast charging the battery.
Steady Green: Fast charging is complete. The ac adapter/charger
continues to trickle charge the battery.
A shielded 8-pin jack for shielded and unshielded twisted pair cable. On
Model DSP-2000, this jack is labeled CABLE TEST. Model DSP-2000 has
an additional RJ45 jack labeled MONITOR, which is used for
10/100BaseTX traffic and hub tests.
Model DSP-100 only. A connector for coaxial cable.
Main Unit Features
Description
Getting Started
2
2-13