Remote Lights, Messages, And Audible Tones - Fluke DSP-100 User Manual

Remote Lights, Messages, and Audible Tones

The standard and smart remotes indicate various states by flashing light-emitting
diodes (LEDs) and emitting audible tones, as described in Table 2-6.
Status
Power on self-test passed.
Power on self-test failed.
Main unit is running a test.
Previous test passed.
Previous test failed.
Battery voltage is low.
Battery voltage is too low to
operate.
Overvoltage condition detected
on cable under test.
Remote Lights, Messages, and Audible Tones
Table 2-6. Status Indications from Remotes
Standard Remote Indications
The unit beeps and all LEDs
flash in sequence.
The unit beeps and the fail LED
flashes continuously.
Test LED is on. Pass and fail
LEDs flash as tests pass or fail.
Pass LED turns on for 15
seconds.
Fail LED turns on for 15
seconds.
Message appears on main unit.
Message appears on main unit.
Message appears on main unit.
Getting Started
Smart Remote Indications
The unit beeps and all LEDs
flash in sequence.
The unit beeps and the fail LED
flashes continuously.
Testing LED is on. Pass and
fail LEDs flash as tests pass or
fail.
Pass LED turns on for 15
seconds.
Fail LED turns on for 15
seconds.
The unit beeps and the low-
battery LED flashes
continuously.
The unit beeps and the low-
battery LED is on continuously.
The unit beeps and all LEDs
flash continuously.
2
2-29