Fluke DSP-100 User Manual page 134

DSP-100/2000
Users Manual
Test Failure
Wire map: open
Wire map: split pair
Wire map: reversed pairs
Wire map: crossed pairs
7-22
Table 7-1. Identifying Cable Faults
Likely Causes of Failure
Wires connected to wrong pins at connector or punchdown blo cks.
Faulty connections.
Cables routed to the wrong location.
Wires broken by stress at connections.
Damaged connector.
Cuts or breaks in cable.
Wires connected to wrong pins at connector or punchdown blocks.
Wires connected to wrong pins at connector or punchdown blocks.
Wires connected to wrong pins at connectors or punchdown
blocks.