Operation; Power On / Off; Normal Operation - Xblue Networks PCS digital User Manual

Operation

The Wireless keyset is designed for people on the go. The interactive display and soft
buttons make it easy to program and operate. This section is to help you understand the
displays.

Power On / Off

To turn the handset on, press the "Hold" button for three (3) seconds. The handset will
go through a start up procedure and the display will say "POWER ON". Although it is
not necessary to turn the power off when not in use, the Wireless Handset can be turned
off by pressing the "Hold" Button for three (3) seconds. When the telephone is idle, it
will automatically go into standby mode to preserve the battery charge. The Handset
becomes active when a call is received or when any key is pressed.
The display will indicate a change in status:
POWER ON

Normal Operation

1) Once the Wireless Handset is registered the display will update to show the ring
mode(s), battery indication, date, time, user name, if supplied, and the extension
number.
Station Lock
Ring Mode
Station Name
2) To extend the battery standby time, the handset is designed to go into standby
mode. Once in standby mode, the display updates, see below, and the handset
becomes passive and does not update until a button is pressed.
3) Depending on the PCS digital System, the Wireless Handset could have an
individual call log, with the following display:
Wireless Key Telephone Handset
POWER OFF
(( )) Ç
JAN 01 TUE 4:11
NAME 12
(( )) Ç
NAME 12
(( )) Ç
JAN 01 TUE 4:12
NAME CID 12
Caller ID call log
Battery Indication
Time and Date
Station Number
- 13 -