Wireless Base Unit; Wall Mount - Xblue Networks PCS digital User Manual

3) The handset will power up, if the battery has enough stored power, and the
display will say:
Note: If the handset does not power up automatically, don't worry, just press the hold button for three (3)
seconds to power it up manually.
4) The handset will try to establish a connection to the base unit, which is not yet
active. The display will update:
a. Ensure the handset is fully charged, but charging it for 24 hours before
use. While programming, each handset is identified by the port that it is
plugged into, port 1 = line 1, port 2 = line 2.

Wireless Base Unit

The wireless base unit is a compact radio transmitter that connects the telephone system
with the Wireless Key Telephone Handset. It contains Printed Circuit Boards (PCB's)
that can be susceptible to excessive heat or cold. Therefore, it should be mounted in a
clean, heat regulated area with a relative temperature of 50 to 80 degrees with a relative
humidity of 40 to 80 percent.
It is complete line powered, by the telephone system through the RJ11C jack so there is
no need to locate it near an AC outlet. It is more important that it is a centrally located
area.

Wall Mount

The Wireless Base Unit can be surface or wall mounted. The wall mount kit is a standard
wall place mounting bracket and the antenna can be kept straight for wall mount, or bent
at a 90 degree angle for surface mounting
Wireless Key Telephone Handset
INITIALIZING
PLEASE WAIT...
NO LINK TO BASE
- 10 -