Xblue Networks PCS digital User Manual page 11

1) Unpack the Wireless Base Unit
a. To provide the best possible signal the unit should be located at an
optimum height and location for the coverage area. Like all wireless
systems, the wireless handset works best when it is in the line-of-sight of
the base unit. Obstacles such as concrete or metal walls can substantially
limit the range. Although rare, other equipment in the same frequency
range may cause interference. When using more than one base unit, be
sure to place them at least 15 feet apart.
b. For proper operation, the dipswitches on the back of the base unit should
all be set to the "Off" position. (All switches are in the up position.)
c. Connect the base unit to the telephone system using one digital port for
each wireless key telephone handset.
i. If both extensions will be used, plug port 2 in first
ii. Plug in port 1 to power up the base unit
Note: The base station is completely powered by the telephone system so there is no need for an external
power supply or AC outlet.
1 2 3
ON
Dip Switch
Line 1 Line 2
Line Power
Wireless Key Telephone Handset
Antenna
- 11 -