Registration - Xblue Networks PCS digital User Manual

Registration

Each Wireless Handset becomes an extension on the system after it has been registered.
To register a new phone, set the Dip Switches on the host base unit, as demonstrated in
the troubleshooting section. Select Registration from the programming menu and press
"OK" (F3).
Select "Yes" to begin the registration process.
(( ))
>REGISTRATION
NO?
While the registration process takes place the following will be displayed:
If the registration process is successful the display will update and a confirmation tone is
heard.
Note: The "#" is the number of the handset being registered. If the procedure fails please see the
Troubleshooting section.
If this procedure fails, the display will update and the registration process will have to
be tried again.
Wireless Key Telephone Handset
(( ))
>REGISTRATION
DE-REGISTER
A (( ))
> REGISTRATION
YES?
(( ))
> REGISTERING
PLEASE WAIT...
(( ))
>REGISTERED
HANDSET #
(( ))
FAILED
TRY AGAIN!
- 18 -