Mitsubishi DX-TL308E Installation Manual page 64

Recording (continued)
Notice
• When you set holidays using the holiday setting
screen and select [Holiday] in the [Day] column, that
program always takes priority.
• When the timer recording is performed on the external
HDD, the recording time may become several seconds
shorter than the designated time.
• When alarm recording starts during timer recording,
the alarm recording continues even when the timer
recording end time comes. The timer recording ends
when the alarm recording ends.
• When alarm or emergency recording starts during
timer recording, the alarm or emergency recording
continues for the specifi ed recording time even if the
start time of the next timer program comes. After the
completion of the alarm or emergency recording, the
next coming timer program starts.
Example 1
Timer program
setting Program 1
Alarm recording
Emergency recording
Example 2
Timer program
setting Program 1
Alarm recording
Emergency recording
Example 3
Timer program
setting Program 1
Alarm recording
Emergency recording
Recording is not performed correctly if there is an error in the settings. To prevent such errors, this recorder notifi es
the user of errors using following methods. If there is an error in the settings, take necessary procedures.
Recorder status
The TIMER indicator blinks.
(The series of short beeps
sounds.)
The TIMER button does not
work.
Timer recording does not
start when the program start
time comes.
64
Program 2
Skip or Off
Extended
Extended
End of Program 1
Program 2
Extended
Shift to Program 2
Extended
End of Program 1
Program 2 Program 3
Extended
Shift to Program 3
Extended
End of Program 1
Description of error
1) The timer program has not been set.
1) A menu is being displayed.
2) Program setting is underway.
1) HDD space runs out when the repeat
recording is disabled.
2) Clock is not correct.
3) Program settings are not correct.
Countermeasure
1) Set the timer program.
• Close the menus.
• Clear the warning indication.
• Enable the repeat recording.
• Set the clock correctly.
• Check the settings on the confirmation screen.
Page
62 - 65
-
128
38
99
62, 63