Connections (continued)
1 Insert the supplied clamp bands into the clamp
Step
holes in the rear of the recorder.
One clamp hole is for the power cable and the other
•
is for USB cables.
For power cable
2 Run the cable to be clamped around the clamp
Step
band as shown in the fi gure.
The rough side of the band should face up.
•
To VIDEO OUT
connector
26
Cable clamping
For USB cable
Connecting an analog VCR
To AUDIO OUT
connector
Audio cable
To AUDIO IN
(commercially available)
connector
Video cable
To VIDEO IN
(commercially available)
connector
3 P u l l t h e e n d o f t h e c l a m p b a n d u n t i l i t i s
Step
tightened.
Tips
•
Illustrations show an example of DX-TL308E.
Analog VCR