Mitsubishi DX-TL308E Installation Manual page 33

9 Picture quality and FPS are automatically
Step
set for the cameras detected in step 7 and a
confi rmation screen is displayed.
The picture quality and FPS are same among all
•
the cameras detected in step 7. The settings made
in this step are applied to normal recording of
Recording A.
Picture size is set to 4CIF (frame mode). (
•
51)
For how to make recording settings manually, see
•
pages 51 to 54.
Check the confi rmation screen and select [Next].
•
Tips
• Audio is not recorded by default. For how to record
audio, see page 60.
When you enable audio recording, the recording cycle
becomes shorter than that when not recording audio.
Check the estimated recording time in the Recording
setting menu. ( Page 53)
• The estimated recording time is based on 24-hour
recording per day.
10 Select [Finish] to exit the Setup Wizard.
Step
The recorder becomes ready for operation.
•
Page
Menu settings/Device registration
33