Password Lock For Hdd Protection; Changing A Password; Password For Restricting Operations (Levels 1 To 3); Password For Hdd Protection - Mitsubishi DX-TL308E Installation Manual

2 Enter a password for the desired level by
Step
pressing the number buttons.
The lock is disabled and the normal screen is
•
displayed.
Notice
• With the password locks for Levels 1 to 3 enabled,
when you disable the lock for Level 1 only, the lock for
Level 2 remains enabled. When the locks for Level 1
and Level 2 are disabled, the lock for Level 3 becomes
enabled.
• When the password locks are enabled for Level 1 and
Level 2, you cannot disable only the lock for Level 2.
Disable the lock from Level 1.
• Be sure to enter the passwords correctly. If you
enter an incorrect password, the password already
entered is canceled and you are required to enter the
password again.
• When you want to cancel the unlocking procedure,
select [Return] on the screen. The screen for unlocking
automatically disappears when no buttons are pressed
for 1 minute.

Password lock for HDD protection

1 Select [Clear] of the desired area in the Main
Step
device of <Data clear> (
Or, select [Setting] of [Delete data from the list]
of <Data protect> (
<Unlock Password for HDD protection> is displayed.
•
2 Press the number buttons to enter the password
Step
for HDD protection.
When you close the <Data clear> or <Data protect>
•
screen, the password lock for HDD protection
becomes enabled.
Tips
• If you forget the password, contact your dealer.
• Each time you execute the data deletion, <Unlock
Password for HDD protection> is displayed and you
are required to input the password.

Changing a password

Password for restricting operations (Levels 1 to 3)

1 Disable the password locks for Level 1 to Level 3.
Step
2 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
page 116).
page 115).
or
3 Select [Password].
Step
Password
The <Password setting> screen is displayed
•
4 Select [Setting] of the level of which password
Step
you want to change.
The screen for setting a password for the selected
•
level is displayed.
5 Select [Clear].
Step
The registered password is cleared.
•
6 Enter a new password according to steps 4 and
Step
5 of "Registering a password."

Password for HDD protection

1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [Password].
Step
Password
The <Password setting> screen is displayed.
•
3 Select [Setting] next to [Password for HDD
Step
protection].
The screen for setting the password lock for HDD
•
protection is displayed.
4 Select [Clear].
Step
5 Press the number buttons to enter the password.
Step
The registered password is cleared.
•
6 Enter a new password according to steps 4 and
Step
5 of "Registering a password."
or
Others
113