Procedure Of Confi Guration Of Recording Settings - Mitsubishi DX-TL308E Installation Manual

Recording (continued)
Display the Main menu.
Left-click the mouse or press the SET UP button on
the front panel of the recorder to display the <Main
menu>.
Display the Recording setting screen.
Select [Recording setting] to display the <Recording setting> screen.
Select [Auto setting] or [Manual setting] for the recording setting method.
[Auto setting]: The recorder automatically detects the cameras from which the recorder is receiving video signals.
When you designate the recording duration, recording time per day, and picture size, the recorder automatically
allocates to the detected cameras the recording picture quality and FPS for normal recording.
[Manual setting]: You can configure the settings shown on the right page manually.
Camera check
The recorder automatically detects the cameras from which it is receiving video signals.
Define the normal recording cycle
When you designate the recording duration, recording time per day, and picture size, the recorder automatically
allocates to the detected cameras the recording picture quality and FPS for normal recording.
Confirm the recording settings
Check the items automatically set.
Apply new settings
Select the recording pattern (A to D) to which you want to apply the automatically set items.
[Recording A]: Used for manual recording and timer recording.
[Recording B] to [Recording D]: Used for timer recording.
The tables on pages 47 to 49 are the lists of setting items shown on the <Recording setting> screen. You can use these lists to
check the parameters and record the menu items you set. Items in boldface type are parameters you can actually set.
For later review, you are recommended to mark on the items you set.
The colored values or settings are factory defaults.
46
Procedure of confi guration of recording settings
Auto setting
1
Page 50
Step
or
2
Page 50
Step
Recording setting
3
Page 50
Step
4
Page 50 <Auto setting>
Step
5
Page 50 <Auto setting>
Step
Page 50 <Auto setting> 6
Step
7
Page 50 <Auto setting>
Step
Manual setting