Table of Contents
Advertisement
Settings related to the menus
<Loading/saving/initializing the menu settings>
You can update the menu settings of this recorder by
copying those of other DX-TL308E/DX-TL304E to externally
connected media and then loading them. Also, you can
save the menu settings of this recorder in external media or
the memory of this recorder.
You can save the menu settings you make in the recorder's
internal memory. Even when some settings are changed after
that, you can restore the recorder according to the saved
menu settings by loading them.
Load the existing menu settings and
set the recorder's menus.
This recorder
Save the menu settings of
this recorder.
Notice
•
D u r i n g l o a d i n g o r s a v i n g o f m e n u d a t a , o t h e r
operations are not accepted.
•
When no HDD is registered as Main device, you
cannot use a USB memory device.
Loading the menu settings
You can load the menu settings stored in external media or
the recorder's memory to update the menu settings of the
recorder.
Notice
•
To load the existing menu settings to update the
recorder's menu settings, confi gure the HDD operation
settings (partition settings) of this recorder in the
same way as that of the copy source recorder. Note
that when the HDD setting configuration is different
between the recorders, the menu settings cannot be
updated.
•
When the menu format is different (for example, when
the menu structure is changed for function expansion),
the menu settings cannot be updated.
1 Select the device from which you want to load
Step
the menu settings.
[DVD/CD]: You can load the menu settings saved on
a DVD/CD disc in an external drive.
[USB memory]: You can load the menu settings
saved in a USB memory device.
[Internal memory]: You can load the menu settings
saved in the recorder's internal memory.
2 Select [Execute].
Step
Save the menu settings of
other DX-TL308E/DX-TL304E.
Other DX-TL308E/
DX-TL304E
Load the existing menu
settings and set the menus of
other DX-TL308E/DX-TL304E.
Menu information
Normal area
Alarm area
Emergency area
Crated : 20-08-2008 13:02:16
Load the menu settings?
The menu settings of this recorder are updated
•
and then "Completed successfully." appears on the
screen.
When no device for loading the menu settings is
•
inserted in the recorder, "No media" appears on the
screen.
Notice
•
You can load the menu settings only while the recorder
is in the stop mode (while playback, recording, archive,
or communication is stopped).
•
The clock of this recorder is not updated by menu
loading. Therefore, set the clock correctly.
Save the menu settings
You can save the recorder's menu settings in external
media or the recorder's internal memory.
1 Select the device in which you want to save the
Step
recorder's menu settings.
[DVD/CD]: You can save the menu settings on a
DVD/CD disc in an external drive.
[USB memory]: You can save the menu settings in
a USB memory device.
[Internal memory]: You can save the menu settings
in the recorder's internal memory.
2 Select [Execute].
Step
The menu settings of this recorder are saved.
•
You can save the menu settings even during
•
playback or recording.
U p o n c o m p l e t i o n o f s a v i n g , " C o m p l e t e d
•
successfully." appears on the screen.
When no device for saving the menu settings is not
•
inserted in the recorder, "No destination device"
appears on the screen.
Notice
•
It may take a few seconds for the recorder to start
loading or saving the menu settings after [Execute] is
selected.
Initialize the menu settings
You can reset the menu settings to the factory defaults.
1 Select [Execute] to initialize the menu settings.
Step
Notice
•
The present time, password, network user ID and
password, and HDD operation settings (partition
settings) are not initialized.
90%
5%
5%
Yes
No
Others
107
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
