Setup Procedure - Mitsubishi DX-TL308E Installation Manual

Start here when you first
set up the recorder.
1
Connect the recorder.
Connect the cameras, monitors, and sensors to the recorder. Configure the settings of the connected devices referring to the
reference pages shown in the descriptions of the devices in "Connections" on
2
Turn on the recorder.
Turn on the main switch on the rear of the recorder. After checking the POWER indicator goes out, press the POWER button on
the front panel of the recorder.
3
Select whether or not to use the Setup Wizard.
When you turn on the recorder first time, the Setup Wizard is activated.
Using the Setup Wizard, you can set the following items automatically according to the displayed menus.
Language setting
The language used for the menu screen is selected.
Clock setting
HDD configuration
All the connected HDDs are registered as Main device. For details of the HDD configuration, see
Recording setting
The settings for normal recording are configured. For details of the recording, see
When using the
Setup Wizard
4-1
Run the Setup Wizard.
Set the items shown above according to the displayed menus.
(To change the
settings made by
the Setup Wizard)
4-2
Change the settings made by the
Setup Wizard.
To manually change the settings made by the Setup Wizard:
As
Language setting
needed
Clock setting Page 99
HDD configuration
Recording setup
5
Make other settings.
Make the necessary settings according to your desired recording operation.
For example,
To carry out timer recording.
As
To use the mirroring mode.
needed
To control the recorder from the personal computer.
To control the camera.
To restrict the recorder's functions by the password lock.
To make settings of screen display and rear terminals.
6
Check the setup condition.
By executing recording, playback, search, and copy, check that the recorder has been set up correctly.

Setup procedure

Page 99
Pages 34 to 37
Pages 44 to 55
Start here when you change
the settings of the
recorder already set up.
Timer program setting
Mirroring setting page 35
PTZ camera setting page 110
page 24.
"Setup Wizard" on pages 32 and 33.
pages 44 to 55.
4
Make the minimum required
settings manually.
Language setting
Clock setting
HDD configuration
Recording setup
How to search for necessary settings
Refer to "How to locate setting items" on the left
page, and find the pages describing the
functions and settings you want to use and
pages 62 to 65 configure the necessary settings.
Communication setting pages 108 and 109
Password setting pages 111 to 114
"Setup menu" on pages 92 to 110.
pages 34 to 37.
When not using the
Setup Wizard
Page 99
Page 99
Pages 34 to 37
Pages 44 to 55
Beginning
3