The supplier will make available on request such circuit diagrams, component part lists,
descriptions, calibration instructions or other information which will assist the User's appropriately
qualified technical personnel to repair those parts of the EQUIPMENT which are classified by the
manufacturer as repairable.
The use of ACCESSORY equipment not complying with the equivalent safety requirements of
this equipment may lead to a reduced level of safety of the resulting system. Consideration
relating to the choice shall include:
- use of the accessory in the PATIENT VICINITY
- evidence that the safety certification of the ACCESSORY has been performed in accordance to
the appropriate EN60601-1 and/or EN60601-1-1 harmonized national standard.
The transportation and storage environmental conditions are:
Temperature : -20°C - +60°C (-4°F - +140°F)
Humidity : 30%-80% RH
Atmospheric pressure : 50 kPa - 106 kPa
Note : The above transportation environmental conditions indicate the storage
environmental conditions during transport.
Dust or other foreign matter adhering to the print paper or the ink ribbon, or deformation resulting
from exposure to extremely low or high temperatures could cause loss of color, uneven color or
lines, or wrinkles in the print images.
Turn off the power of this unit after completing auto loading/ejecting of the ribbon cartridge.
MEMORIZED IMAGES ARE STORED IN VOLATILE MEMORY AND MAY BE LOST IN THE
EVENT OF POWER FLUCTUATION OR MALFUNCTION.