Transferring A Conference; Dropping Out Of A Conference; Ending A Conference And Placing All Parties On Hold - Mitel 8568 Getting Started Manual

Call Features

Transferring a Conference

You can transfer an existing conference to another extension.
To transfer a conference:
1. During the conference, press
2. Announce the conference (if desired), and then hang up. CONFERENCE TFR from

Dropping Out of a Conference

You can drop out of a conference and return to the conference later.
To drop out of a conference:
To return to the conference:

Ending a Conference and Placing all Parties on Hold

You can end a conference and place all conference parties on Individual Hold, allowing you to
toggle between the held parties and speak to one party at a time.
To end a conference and place all parties on Individual Hold:
To toggle between the held callers:
Page 36
<name> appears on the called party's display. The party must then press the flashing
Conf button to connect to the conference.
Press the Conf button or
NUMBER appears. This removes you from the conference but leaves the other parties
connected.
Press the flashing Call button. CONFERENCE WAS HOLDING appears, and you are
reconnected to the conference.
Press the Conf button, and then press
HOLD appears.
Press (Hold) twice for internal parties or the applicable Call button for external
parties.
(Transfer), and then dial the extension number.
(Hold), and then hang up. ENTER EXTENSION
(Hold). CONFERENCE PARTIES ON
Mitel ® 8568 Telephone User Guide – Issue 1, November 2009