3Ware 720-0186-00 Manual page 60

Chapter 2. CLI Syntax Reference
53
:
Example 1 Advanced Verify Schedule
For 9550SX and earlier controllers, and when verify=advanced for 9650SE
and 9690SA controllers running 9.5.1, the show verify command displays the
current verify background task schedule as illustrated below.
//localhost> /c1 show verify
Verify Schedule for Controller /c1
========================================================
Slot Day Hour
--------------------------------------------------------
1 Mon 2:00am
2 - -
3 Tue 12:00am
4 Wed 12:00am
5 Thu 12:00am
6 Fri 12:00am
7 Sat 12:00am
A status of "disabled" indicates that the controller will not use the defined
schedule timeslots and will start verifying within 10 to 15 minutes, if the
verify command is entered manually, or it will begin automatically if the
autoverify option is set. Rebuilds, migrations, and initializations will take
priority over verifies.
Example 2: Basic Verify Schedule
For 9650SE and 9690SA controllers, if the "basic" Verify Task Schedule is
selected, the show verify command displays a schedule as illustrated below:
//localhost> /c1 show verify
/c1 basic verify weekly preferred start: Friday 12:00am
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1
Duration Status
4 hr(s) disabled
- disabled
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled