Table of Contents
Advertisement
Chapter 2. CLI Syntax Reference
25
Shell Object Commands.
information (such as alarms, diagnostics, rebuild schedules, and so forth)
about all controllers in the system. For details, see "Shell Object Commands"
on page 26.
Controller Object Commands.
information and perform actions related to a specific controller. For example,
you use controller object commands for such tasks as seeing alarms specific
to a controller, creating schedules during which background tasks are run, and
setting policies for the controller. You also use the controller object command
/cx add type to create RAID arrays. For details, see "Controller Object
Commands" on page 32.
Unit Object Commands.
perform actions related to a specific unit on a specific controller. For example,
you use unit object commands for such tasks as seeing the rebuild, verify, or
initialize status of a unit, starting, stopping, and resuming verifies, starting
and stopping rebuilds, and setting policies for the unit. You also use the
controller object command /cx/ux migrate to change the configuration of a
RAID array. For details, see "Unit Object Commands" on page 74.
Phy Object Commands.
perform actions related to a specific phy on a 9690SA controller.
Port Object Commands.
perform actions related to a drive on a specific port or vport. You can use port
object commands for such tasks as seeing the status, model, or serial number
of the drive. For details, see "Port Object Commands" on page 97.
BBU Object Commands.
perform actions related to a Battery Backup Unit on a specific controller. For
details, see "BBU Object Commands" on page 108.
Enclosure Object Commands.
information and perform actions related to a particular enclosure. For
example, you can use enclosure object commands to see information about an
enclosure and its elements (slots, fan, and temperature sensor elements).
Help commands allow you to display help information for
Help Commands.
all commands and attributes. For details, see "Help Commands" on page 121.
Shell Object Commands
Controller Object Commands
Unit Object Commands
Port Object Commands
Phy Object Commands
BBU Object Commands
Enclosure Object and Element Commands
Help Commands
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1
Shell object commands set the focus or provide
Controller object commands provide
Unit object commands provide information and
Phy object commands provide information and
Port object commands provide information and
BBU object commands provide information and
Enclosure object commands provide
Advertisement
Table of Contents
