2Wire HomePortal Installation Manual page 47

The D-Link Air DWL-650 Configuration
2.
screen appears.
Select the Configuration tab.
3.
In the Mode field, enter
4.
In the SSID field, enter the word "
5.
followed by the last three digits of your
HomePortal serial number. This is the Wireless
Network Name. The Wireless Network Name is
case-sensitive, so it is important that you enter
the word " " in capital letters.
2WIRE
In the Tx Rate pull-down menu, verify that
6.
is selected (this is the default).
Fully Automatic
In the PS Mode pull-down menu, verify that
7.
is selected (this is the default).
Disabled
Click
8.
Apply Changes
Select the Encryption tab.
9.
From the Encryption (WEP) pull-down menu,
10.
select .
64 Bit
In the WEP Key Entry field, select the
11.
radio button.
Entry
In the Key 1 field, enter your ten-digit Wireless
12.
Encryption Key, located on the bottom of your
HomePortal.
From the Default Tx Key pull-down, select
13.
Click .
14.
Apply
Click .
15.
OK
.
Infrastructure
"
2WIRE
.
Manual
1
.
43