2Wire HomePortal Installation Manual page 45

In the Profile Management field, enter your
4.
profile name. The profile name identifies your
wireless profile, and should be no more than 29
characters in length.
Click . The 340 Series Properties screen
5.
Apply
appears.
Select the
6.
System Parameters
Name field, enter a client name. The client
name identifies your PC.
In the SSID1 field, enter the word "
7.
followed by the last three digits of your
HomePortal serial number. This is the Wireless
Network Name. The Wireless Network Name is
case-sensitive, so it is important that you enter
the word " " in capital letters.
2WIRE
In the Power Save Mode field, verify that the
8.
CAM (Constantly Awake Mode)
selected (this is the default).
In the Network Type field, verify that the
9.
Select the Network Security tab. In the WEP
10.
field, select the
Use Static WEP Keys
button.
In the WEP Key Entry Method field, verify that
11.
the
Hexadecimal (0-9, A-F)
selected.
In the WEP Key 1 field, select the
12.
radio button and enter your ten-digit Wireless
Encryption Key, located on the bottom of your
HomePortal.
tab. In the Client
"
2WIRE
radio button is
Infrastructure
radio
radio button is
Transmit Key
41
radio button is selected (this is the default).