2Wire HomePortal Installation Manual page 43

To identify your network, click
6.
Configuration screen appears.
In the Network Name field, enter the word
7.
" " followed by the last three digits of
2WIRE
your HomePortal serial number, located on the
bottom of your HomePortal. This is the
Wireless Network Name. The Wireless
Network Name is case-sensitive, so it is
important that you enter the word "
capital letters.
Click . In the Set Security field, check the
8.
Next
Enable Data Security
Use Hexadecimal (0-9, a-f, A-F)
selected.
In the Key field, enter your ten-digit Wireless
9.
Encryption Key, located on the bottom of your
HomePortal.
Verify that is selected in the
10.
Key 1
pull-down menu (this is the default).
with
To select a power management option, click
11.
. The following screen appears.
Next
Select the power management option that you
12.
wish to use (the default is
. The Edit
Next
" in
2WIRE
checkbox. Verify that the
radio button is
Encrypt data
), and click
Off Next
.
39