What To Do If - Smeg SC712U Instruction Manual

9.4 What to do if...

The oven display is blank
The oven does not heat up
The controls do not respond.
Cooking takes longer than the
times indicated in the cooking
table.
After self-cleaning, the oven
functions do not work.
The display shows ERR 4
If the door is opened during an
oven function using convection,
the fans shut off.
30
Instructions for the user
• Check the mains power supply.
• Check the household circuit breaker panel to make sure the
circuit breaker on the circuit supplying the oven is in the "ON"
position.
• Check whether the "Showroom" feature has been enabled. For
further details see paragraph "Secondary menu" on page 17.
• Check whether the "Child Lockout" feature has been enabled.
For further details see paragraph "Secondary menu" on page 17.
• Check whether the "PO" (power miser) feature has been
enabled. For further details see paragraph "Secondary menu" on
page 17.
• Check whether the door interlock device is enabled. If it is not,
the oven has a safety feature that does not allow functions to be
selected while the door interlock device is active. This is because
the temperatures inside the oven are still too high to allow any
type of cooking.
• The door interlock device has not hooked to the door properly.
This might be because the door was accidentally opened during
its activation. Turn off the oven and turn it on again waiting a few
minutes before selecting a new cleaning cycle.
• This is not a fault. It is a normal feature of the appliance and is
meant to avoid excessive loss of heat when the door is opened.
When the door is closed, the oven will resume normal operation.