Staple Sort - Sharp SF-2530 Operation Manual

10-BIN STAPLE SORTER (SF-S54N)/ 20-BIN STAPLE SORTER (SF-S56)

Staple sort

The STAPLE SORT mode staples copies of 5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17" sizes (SF-S54N) or
copies of 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17" sizes
(SF-S56).
Stapling location
SORT
STAPLE
SORT
GROUP
POWER SAVE
1 2 3
4 5 6
7 8 9
0
C
SF-S54N
SF-S56
70
Using the document glass
Set the original on the document glass with the corner
1
to be stapled to the upper right.
Copy from the last page to the first page.
SF-S54N
If the number of copies to be delivered into each bin is more than
30 for 5-1/2" x 8-1/2", 8-1/2" x 11" or 8-1/2" x 11"R paper or 15
for 8-1/2" x 14" or 11" x 17" paper, the copies will not be stapled.
SF-S56
If the number of copies to be delivered into each bin is more than
50 for 8-1/2" x 11" or 8-1/2" x 11"R paper or 25 for 8-1/2" x 14"
(ORIGINALS)
EVEN NUMBE
or 11" x 17" paper, the copies will not be stapled.
ODD NUMBER
Press the SORTER key to select the STAPLE SORT
2
mode.
Make sure that there is no paper in any sort bin before selecting
PRE-COUNT
the STAPLE SORT mode.
ORIGINALS
3 Set the number of copies.
Up to 10 sets (SF-S54N) or 20 sets (SF-S56) can be made.
START
4 Press the START key.
5 When all copies are made and sorted, press the manual
staple key.
Each set of copies will be stapled.
Sets of copies containing copies of different width will not be
stapled.