20-BIN STAPLE SORTER(SF-S53)
Stapling location
STAPLE
SORT
COPIES SELECTED
PROGRAM
P
1
CLEAR ALL
CA
4
7
INTERRUPT
AUDIT
0 /
CLEAR
3
6
9
CLEAR/STOP
C /
74
Downloaded from:
http://www.usersmanualguide.com/
PRE-COUNT
ORIGINAL
COPIES MADE
3
2
START
5
6
8
9
CLEAR/STOP
C /
ERA
START
CHAN
I
I
STAPLE SORT (SF-S53 only)
The STAPLE SORT mode automatically staples copies of A4, A4R,
B4, A3, 8-1/2" x 11", and 8-1/2" x 14" (8-1/2" x 11", 8-1/2" x 11"R, 8-
1/2" x 14", 11" x 17", and A4) sizes. For other paper sizes, use the
manual stapling mode. See page 76.
Using the RADF
Set the originals in the RADF tray face down with the
1
stapling position in the upper right corner.
If the number of copies to be made is more than 50 for A4,
A4R, or 8-1/2" x 11" (8-1/2" x 11", 8-1/2" x 11"R, or A4) paper
or 25 for B4, A3, or 8-1/2" x 14" (8-1/2" x 14" or 11" x 17")
paper, the copies will not be stapled.
2
Press the STAPLE SORT key to select the STAPLE
SORT mode.
Make sure that there is no paper in any sort bin before select-
ing the STAPLE SORT mode.
Set the number of copies.
3
Up to 20 sets can be made.
Press the START key.
4
When copying and sorting are completed, each set of copies
will be automatically stapled.
Sets of copies containing copies of different width will not be
stapled.