TONER SAVE MODE
This mode reduces toner consumption, increasing cost effective-
ness, with only a slight loss in copy density. Follow the procedure
below for setting the toning level.
IGINAL TO COPY
EXPOSURE
AUTO
(ORIGINALS)
MANUAL
EVEN NUMBER
PHOTO
ODD NUMBER
1 2 3 4 5
PRE-COUNT
IGINAL TO COPY
EXPOSURE
AUTO
(ORIGINALS)
MANUAL
EVEN NUMBER
PHOTO
ODD NUMBER
1 2 3 4 5
PRE-COUNT
1 2 3 4 5
T
DARK
LIGHT
Press the EXPOSURE key to select the PHOTO mode.
1
AU
Open the front cover.
2
3
Press and hold the EXPOSURE key for more than 3
AU
seconds.
The exposure indicator marked "3" will light up, indicating that
the standard toner mode is active.
To enter the toner save mode, press the LIGHT key.
4
The exposure indicator marked "1" will light up, indicating that
the toner save mode is selected.
Close the front cover and press the EXPOSURE key to
5
select the desired exposure mode.
To return to the standard mode, repeat the procedure but use
the DARK key to select exposure level "3" in step 4.
21