Copier Trouble - Sharp SF-2530 Operation Manual

COPIER TROUBLE?

Problem
Copier does not operate.
Copies are too dark or
too light.
Blank copies.
Copies smear if rubbed.
Paper misfeeds
frequently.
46
Copier plugged in?
Power switch on?
Copy density properly
adjusted?
Are the indicator and the
copy quantity display blinking?
Is the original placed face down
on the document glass?
Paper too heavy?
Paper damp?
Non-standard paper used?
Is paper properly installed?
Pieces of paper inside copier?
Paper curled or damp?
Solution
Plug the copier into a grounded outlet.
Turn the power switch on.
See pages 9 and 20.
Contact your Sharp Service Center as
soon as possible. See page 28.
Place the original face down on the
document glass.
Use copy paper within the specified
range. See page 49.
Replace with dry copy paper. Be sure
to store copy paper in a dry location.
Use standard paper.
If using special papers, feed the paper
through the manual feed tray.
See pages 4 and 12.
Remove all pieces of misfed paper.
See page 22.
Store copy paper flat in the wrapper
in a dry location. See page 50.