Loading Copy Paper - Sharp SF-2530 Operation Manual

LOADING COPY PAPER

The paper required ( ) indicator will light up when
there is no copy paper in a selected paper feed station
or when a selected paper tray is not installed or is
improperly installed.
For best results, use only Sharp recommended paper.
The copy paper size for the 500-sheet paper drawer
and the optional stand/500-sheet paper drawer or
optional stand/1000-sheet paper drawer will be set by
Sharp service personnel according to your request
when you purchase the copier. If a different paper size
setting is required, contact your authorized Sharp
Service Center.
Maximum height line
4
The 500-sheet paper drawer can be adjusted for four
different paper sizes: 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", and 11" x 17".
The 1000-sheet paper drawer can be adjusted for
three different paper sizes: 8-1/2" x 11", 8-1/2" x 11"R,
and 8-1/2" x 14".
The paper size for the lower paper tray can be
changed by the user.
500-sheet paper drawer
1 Gently lift and pull out the paper tray.
If there is paper in the tray, push the tray firmly back into the
copier.
If the tray is empty, fan the copy paper and insert it into
2
the tray.
The tray holds 500 sheets of 20 lb. bond paper.
Do not load paper above the maximum height line.
3 Push the paper tray firmly back into the copier.