AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying
needs.
IGINAL TO COPY
EXPOSURE
AUTO
(ORIGINALS)
MANUAL
EVEN NUMBER
PHOTO
ODD NUMBER
1 2 3 4 5
PRE-COUNT
IGINAL TO COPY
EXPOSURE
AUTO
(ORIGINALS)
MANUAL
EVEN NUMBER
PHOTO
ODD NUMBER
1 2 3 4 5
PRE-COUNT
1 2 3 4 5
T
LIGHT
DARK
20
Ensure that the copier is in the AUTO exposure mode.
1
AU
Open the front cover.
2
3
Press and hold the EXPOSURE key for more than 3
AU
seconds.
One or two exposure indicators corresponding to the automatic
exposure level which has been selected will light up. The factory
default setting is level "3".
Press the LIGHT or DARK key to lighten or darken the
4
automatic exposure level as desired.
5
Close the front cover.
This automatic exposure level will remain in effect until you
change it again by this procedure.