Table of Contents
Advertisement
FINISHER (AR-FN5)
Staple sort
In the staple sort mode, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17", B5, A4, A4R,
B4, and A3 size copies can be stapled.
NOTE:
Different size originals cannot be copied onto copy paper of their respective sizes in the staple
sort mode.
#KEY OPERATOR If stapler is disabled using a key operator program, the staple sort mode cannot
be used. See page 19 of the KEY OPERATOR'S GUIDE.
Using the platen glass
1
Set an original face down on the platen glass with the corner to be
stapled to the upper right position.
G
If the number of copies in one set is more than 30, the copies will not be stapled.
G
If the orientation of the original does not match that of the copy paper, the image of the
original will be rotated. The stapling position varies with the orientation of the original.
G
When copying 8-1/2" x 14" or 11" x 17" size originals with portrait orientation images,
copies will be stapled at the position shown below.
2
Press the OUTPUT key.
G
The output mode selection screen will appear.
106
Stapling position
Stapling position
OUTPUT
NO SORT
SORT
1
3 2
STAPLE SORT
EXIT
CENTER
CENTER
Advertisement
Table of Contents
