Adding Toner - Sharp SF-2530 Operation Manual

Sealing tape
4 Place the new toner cartridge with the tabs in the
notches as shown.
5 Slide the toner cartridge along the guides over the toner
hopper.
6 Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
7 Tap on the top of the toner cartridge 5 times to release
all toner into the toner hopper.
It will take about 30 seconds for the toner to flow into the toner
hopper. Do not remove the toner cartridge until it is empty.
Slide the empty toner cartridge back along the guides
8
and remove it.
The cartridge opening will be closed as it is moved back along
the guides.
9 Slide the toner hopper into the copier and return the
toner hopper lock lever into place.
If the toner hopper is not positioned properly, either the copies
will come out blank or
indicating that the copier will not operate. In either case, ensure
that the toner hopper is properly locked in its operating position.
Close the front cover .
10
NOTE:
Add only one cartridge of toner.

ADDING TONER

will blink in the copy quantity display
7