Loading Copy Paper - Sharp SF-2530 Operation Manual

STAND/500-SHEET PAPER DRAWER (SF-D20)/STAND/1000-SHEET PAPER DRAWER (SF-D21)

Loading copy paper

The size of the copy paper for the paper tray will be set by Sharp
service personnel according to your request when you purchase the
copier. If a different paper size setting is required, contact your
authorized Sharp Service Center.
SF-D20
The 500-sheet paper drawer is available in four different paper
sizes: 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17".
SF-D21
The 1000-sheet paper drawer is available in three different paper
sizes: 8-1/2" x 11", 8-1/2" x 11"R, and 8-1/2" x 14".
Stand/500-sheet paper drawer (SF-D20)
Gently lift and pull out the 500-sheet paper drawer.
1
Fan the copy paper and insert it in the paper drawer.
2
The 500-sheet paper drawer holds up to 500 sheets of 20 lb.
paper.
Do not load paper above the maximum height line.
3 Push the paper drawer firmly back into the copier.
Stand/1000-sheet paper drawer (SF-D21)
1 Pull out the 1000-sheet paper drawer.
Fan the copy paper and insert it in the paper drawer.
2
The 1000-sheet paper drawer holds up to 1,000 sheets of 20 lb.
paper.
Do not load paper above the maximum height line.
Push the paper drawer firmly back into the copier.
3
83