Adjusting The Picture - Sharp XG-V10WE Operation Manual

Adjusting the Picture

Projector
(GUI) On-screen Display
e. g. (RGB input in INPUT 1 or 2 mode)
1
2
43
Remote Control
1, 4
2, 3
1.2.3 4.5.6
You can adjust the projector's picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
ß button
Selected item
Contrast For less contrast
Bright For less brightness
Color For less colour intensity
Tint Skin tones become purplish
Sharp
For less sharpness
Red For weaker red
Blue For weaker blue
All image adjustment items are returned to the factory preset
Reset
settings.
• "Color", "Tint" and "Sharp" do not appear for RGB input in
INPUT 1 or 2 mode.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ∂/ƒ to select a specific adjustment item.
3 Press ß/© to move the
adjustment item to the desired setting.
4 To exit from the GUI, press MENU.
• To reset all adjustment items, select "Reset" on the "Picture"
menu screen and press ENTER.
• The adjustments can be stored separately in the INPUT 1
to 5 modes.
• Depending on the type of signal received, "Sharp" may not
be adjustable for COMPONENT input in INPUT 1 or 2 mode.
© button
For more contrast
For more brightness
For more colour intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
MOUSE ADJ.
mark of the selected