Siemens SIMATIC NET Manual page 80

7 Example — OPC Application for Industrial Ethernet
Initial Situation
If you want to try out the example yourself, you require the following:
S a PC
S a communication module for Industrial Ethernet (CP 1613)
S the SIMATIC NET CD 11/2003 software
S an S7-400 with a CP 443-1
S Industrial Ethernet cabling between the PC module and S7 device
For the S7-400 device and the PC station, you require a STEP 7 project that was
created on a central ES station (not this PC station).
In the project, you specify the hardware configuration and the programs and data
blocks and define a symbol table.
80
Commissioning PC Stations - Manual and Quick Start
C79000-G8976-C156-07
Release 5/2005