Siemens SIMATIC NET Manual page 210

16 Configuration Console Tool
2 As default, all protocols are activated.
Deactivate the protocols you do not want the OPC Server to use.
Activate the protocols that were specified in the configuration and that you want to use as of
now.
3 "Apply" the settings.
Notice
When you download a configuration, all protocols configured in the project engineering are
activated automatically, even if you had deactivated them previously. If necessary, you must
also deactivate such protocols again.
Note
By deactivating protocols you restrict the range of functions and possibly also the
operability of the PC station, the SIMATIC NET Information Service therefore
notifies you of this
setting!
210
Activity
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07