Siemens SIMATIC NET Manual page 6

This manual...
Among other things, this release includes the following new functions:
S Using the CP 1616 as a PROFINET IO Controller/Device
The manual now includes a detailed description of how the CP 1616 can be
configured as a PROFINET IO controller and device.
The Documentation in the "S7-CPs / NCM S7" Documentation Package and on
the Internet
You can order this manual along with other documents in a manual package.
You will find the current version of the manual on the Internet at:
http://www4.ad.siemens.de/view/cs/de/13542666
Additional Information on SIMATIC S7 and STEP 7
The documentation on SIMATIC S7 and STEP 7 contains additional information on
the STEP 7 basic software of the SIMATIC automation system. You can obtain
these from your local Siemens office.
Validity of this Manual
The information in this manual applies to
S Version 5.3 SP1 and higher of the project engineering software SIMATIC NCM
PC / STEP 7 with the NCM S7 option;
S CD 11/2003 and higher from SIMATIC NET
6
Commissioning PC Stations - Manual and Quick Start
C79000-G8976-C156-07
Release 5/2005