Siemens SIMATIC NET Manual page 280

A Notes for Users of Older Versions
A.3 Continued Use of Previous Project Engineering
Continued Use of Databases and Project Engineering Tools
The following table shows an overview of the previous database types and the
corresponding project engineering tools and indicates whether continued use is
possible:
Protocol
DP
FDL
FMS
S7
S7
SEND/RE
CEIVE
TF
Note
If you want to continue using the previous project engineering tools, use the
SIMATIC NET CD 05/2000.
280
Database Project
Type
Engineering Tool
LDB COM PROFIBUS
TXT Text Editor
LDB COM PROFIBUS
LDB COML S7
XDB STEP 7
TXT Text Editor
LDB COML TF
Continued Use
Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
Continued use possible, the XDB database
must be imported.
Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
Continued use possible, as previously with
COML TF.
Commissioning PC Stations - Manual and Quick Start
C79000-G8976-C156-07
Release 5/2005