Inserting A Dp Slave - Siemens SIMATIC NET Manual

8.4.3

Inserting a DP Slave

ET 200B as DP Slave
In this section, you insert an ET 200B as DP slave and assign it to the DP master
system.
1. Open the catalog in the right pane of the application window.
If it is not already displayed, open the catalog by clicking on the following button:
2. Select the DP Slave ET 200B with 16 digital input and output bits in the catalog:
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
8 Example — OPC Application for PROFIBUS-DP
Activity
103