Snmp Traps - Siemens SIMATIC NET Manual

5 Project Engineering for the OPC Server
Using the "Edit Plant Configuration" button, you obtain a list with all the devices
registered with the OPC server.
You can add others to this list or edit the parameters of the entered devices.
Device Profiles on the SIMATIC NET Software CD
Device profiles are available for the following modules on the SIMATIC NET
Software CD:
S CP 1613 - -> MIBII_V10.txt (supports only MIBII objects)
S OSM - -> Profil_OSM_V10.txt
S ELS - -> Profil_ELS_TP40_V10.txt
These files are stored in the following folder:
<installationdrive>\Programs\Siemens\simatic.ncm\S7data\SNMP\Profile
Note
Please read the detailed description of the parameters in the online help of the
dialog in STEP 7 / NCM PC.
5.5.2

SNMP Traps

Introduction
Traps are messages that can be sent to the OPC Server without it requesting
them. There are seven generic traps available on every SNMP-compliant device.
There are also device-specific traps that are described in the MIB file.
Generic Traps
Parameter
warmStart
coldStart
linkDown
linkUp
authenticationFailure
66
This is sent after a warm restart on the device.
This is sent after a cold restart on the device.
This is sent when a connection from the device
disconnects.
This is sent when a connection from the device is
established.
This is sent when there was unauthorized access to the
device.
Commissioning PC Stations - Manual and Quick Start
Meaning
Release 5/2005
C79000-G8976-C156-07