Siemens SIMATIC NET Manual page 150

11 Example — PROFINET Communication with OPC
1. Start the Station Configuration Editor by selecting it in the start menu (Start
Configuration Editor).
2. Click the "Import Station" button, select the XDB file that you want to import and confirm the
dialog with "OK".
3. Check whether the settings of the module match the local configuration.
Note
To operate PROFINET, no STEP 7 project engineering data is necessary on the
PC station.
150
Procedure for "Initial Configuration"
Commissioning PC Stations - Manual and Quick Start
C79000-G8976-C156-07
"
Station
Release 5/2005