Siemens SIMATIC NET Manual page 191

The PC Station Wizard supports you in the following situations:
S Changing local settings
If the SIMATIC NCM PC configuration tool is installed on the destination PC
station, the wizard can compare the configuration data with the planned
configuration data that already exist. The communications parameters can then
be edited in the project directly.
S Editing a saved configuration
Open an existing project and compare the local configuration with the
information in the project.
In contrast to the "Change local settings" function, the configuration edited here
is independent of an existing local configuration.
S Creating a new configuration
If the SIMATIC NCM PC configuration tool is installed on the destination PC
station, the wizard can create a new project and enter the local configuration in
the project.
S Starting the Station Configuration Editor
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
14 PC Station Wizard
191