Attaching The Modules; Screwing The Modules In Place - Siemens SIMATIC S7-400 Installation Manual

Installing the S7-400

Attaching the Modules

Attach the modules one by one (1) and swing them carefully downwards (2). If you
feel a resistance when swinging the module down, raise it slightly and then
continue.
Figure 2-4

Screwing the Modules in Place

Figure 2-5
2-32
(1)
(2)
Attaching the Modules
Tightening torque
0.8 to 1.1 Nm
Screwing the Modules in Place
Automation System S7-400 Hardware and Installation
A5E00850741-01