Siemens SIMATIC S7-400 Installation Manual page 91

Automation system, hardware and installation
Hide thumbs Also See for SIMATIC S7-400:
Table of Contents

Advertisement

Notes on Ordering Labeling Sheets for S7-400
Order Number
6ES7492-2AX00-0AA0
6ES7492-2BX00-0AA0
6ES7492-2CX00-0AA0
6ES7492-2DX00-0AA0
How to Label S7-400 Modules
Method 1: Using Templates
1. Find the templates on the Internet
You can download the templates from the Internet free of charge. Search for the
templates on the Customer Supports homepage under article ID 11765788.
2. Download
The download contains templates for the labeling of S7-400 modules.
The templates for S7-400 make the labeling strips available for the outside of
the front connector cover and the terminal diagrams for the inside of the front
connector cover.
3. How to Print the Labeling Sheets Using the Templates
The idea is to use the templates to print directly onto the foil sheets. You can
use a laser printer to label the foil sheets. Proceed as follows:
a) Select page layout view in WORD to edit the template forms.
b) Label the module by clicking in the text boxes and entering the
application-specific designation.
c) Always print a preview of the form on white paper, and compare the layout
with the original labeling sheets. Because there are differences between the
different printers and printer drivers and their accuracy, the dimensions may
vary and adjustment may be necessary. If the line and column spacing is not
set correctly, you can adjust the position of the entire template under
"Header>Graphics>Position" and "File>Page Setup>Margins".
d) When some templates are printed, a message reporting that the margins are
outside of the printable area appears. This message can be ignored.
e) Once you have printed the film sheets, make sure that you fold the labeling
strips along the perforation before separating them. This will ensure that the
edges of the strips are even. You can then apply the labeling strips to the
corresponding module.
Method 2: Using the "S7-SmartLabel" Add-On Tool for SIMATIC STEP 7
You can derive the labeling directly from the STEP 7 project. The basis for
application-specific labeling is the symbol table in STEP 7. Detailed information is
available on the Internet under: http://www.s7-smartlabel.de/.
Automation System S7-400 Hardware and Installation
A5E00850741-01
SIMATIC S7-400, 10 A4 label sheets, 4 labeling strips /
sheets for signal modules. Material: film, perforated, for laser
printers. 10 sheets per package.
Petrol
Light--beige
Yellow
Red
Wiring the S7-400
Description
4-31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents