Reading The Connection Quality On The Icon; Status Indicators - Siemens Gigaset 300 Manual

Installing the Gigaset USB Adapter 300
If no connection is currently active, a red cross appears above the icon and Discon-
nected appears in the QuickInfo.

Reading the connection quality on the icon

The icon changes gradually depending on the current connection quality. The better the
connection quality, the higher the transmission speed.
With reasonable to poor connection:
ì
If possible, move your PC closer to the connection partner for greater field strength.
No WLAN available (red cross over bar)
There is no LAN available to which you could establish a connection within
the reach of your Gigaset USB Adapter 300.
ì
Check the configuration of the access point and adjust the settings for
the Gigaset USB Adapter 300 accordingly.
OR
ì
Change your location to reduce the distance to a connection partner.

Status indicators

The Gigaset USB Adapter 300 has two status indicators (LEDs). They are used to indicate
the
u
Operating status (Power), green
u
Transmission status (Link/Act), green
LED State
On
Power
Off
On
WLAN Blinking
Off
18
Meaning
The Gigaset USB Adapter 300 was installed successfully
on your PC and is ready for operation.
The device is not ready.
There is no connection to the wireless network.
Data is being transmitted.
There is currently no data traffic.