Table of Contents
Advertisement
Configuring the Gigaset USB Adapter 300
SSID
Network Mode
Transmission Rate
Channel
Transmission Mode
Security
Received Packets
Sent Packets
Link Quality
Signal Strength
38
Shows the ID for the network environment.
(see "SSID (Service Set Identifier)" on page 28)
Shows the structure of the network environment
(see "Network Mode" on page 29)
Shows the current transmission rate in Mbps.
Shows the channel used for radio transmission
(see "Channel" on page 29)
Shows the WLAN standard used for data transmission
(see "Transmission mode" on page 30).
If your PC runs with Windows Vista mode, the transmission
mode 802.11n may not be displayed, depending on the type of
access point in your wireless network.
Shows the encryption method
(see "Configuration – Security" on page 31)
Shows how many data packets have been received on your PC
from connection partners in the current WLAN since the con-
nection was set up.
Shows how many data packets have been sent to connection
partners in the current WLAN from your PC since the connec-
tion was set up.
Shows the quality of the wireless connection.
The graphic display of the connection quality is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).
Shows the strength of the radio signal in the wireless connec-
tion.
The graphic display of the signal strength is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).
Advertisement
Table of Contents
