Table of Contents
Advertisement
Uninstalling the Gigaset USB Adapter 300
Uninstalling the Gigaset USB Adapter 300
You may have to uninstall the Gigaset USB Adapter 300 if:
u
An error occurred during installation.
u
The Gigaset USB Adapter 300 is not working properly and the problem cannot be
rectified (see the section entitled "Troubleshooting" on page 46).
u
You have acquired a newer version of the Gigaset USB Adapter 300 and the operat-
ing instructions for the new device recommend uninstalling older versions.
u
You no longer need the Gigaset USB Adapter 300 and want to free up space on your
hard drive and in working memory.
Uninstalling involves the following steps:
1. First uninstall the software for the Gigaset USB Adapter 300.
2. Then uninstall the hardware.
3. Complete the uninstall process.
Uninstalling the software
To uninstall the software for the Gigaset USB Adapter 300 from your PC:
ì
Close all running programs.
ì
Select Start – Programs –Gigaset USB Adapter 300 – Uninstall Gigaset USB
Adapter 300.
ì
Confirm the security prompt for the uninstall process with OK.
The software and all the drivers will now be removed from your PC.
Note:
Do not restart your PC until you have also removed the hardware.
If you restart your PC before removing the Gigaset USB Adapter 300, Windows will
automatically launch its hardware recognition program. If this happens, close
automatic hardware recognition by clicking Cancel.
Completing uninstall
ì
Remove the Gigaset USB Adapter 300 or the USB cable from the USB port of your PC.
ì
Follow the remaining instructions and then restart your PC.
44
Advertisement
Table of Contents
